Community Discussions

hi,I will be upgrading Cribl distributed upgrade from 3.0.4 to 4.5 and Just wanted to ask if we need to upgrade worker nodes in the default worker group if we don’t use them and will be decommissioned after the upgrade?thanks

In raw there is a field called origin="123456"I want to extract this from the events how can I do this?

Getting SSL errors on Cribl(client) connection to Splunk LB instances at Splunk clod. Getting client disconnected before establishing TSL communication. How do I address this?

I'm trying to collect the full windows event messages, all the fields plus the full message/rendered message (the view you see in windows) It seems like if use the json method I get that message at least sometimes but then really crucial information like username domain etc are buried in the properties field, and if I use xml then I get all the fields with names etc, but I don't get that rendered message at all.I'm used to working with winlogbeat and nxlog and this is pretty standard to do in those, but is there a way to do this in the edge agent?

How do I create a Pack From API, there is documentation for Wizz API Integration with Cribl?

Has anyone been able to configure an S3 collector for Cisco umbrella? I'm certain the fields for Path and S3 bucket are correct but nothing is being pulled and I'm not sure where the issue is. Any guidance or tips are appreciated.

Hi EveryoneI am have a strange problem with metric feed from a route that uses the Windows Pack. I currently forward ALL my Cribl metrics via Quickconnect to Splunk and simply add a index and sourcetype field (no other changes).When run my mstats search on cribl.logstream.route.in_bytes and cribl.logstream.route.out_bytes and split by the route name. The only metric i dont seem to see if the route that uses the Windows pack? I have tested a couple other packs like fortigate and that works. I do however see metrics using cribl.logstream.sourcetype.in_bytes and cribl.logstream.sourcetype.out_bytes when I use event_sourcetype? Find this a bit bizarre?Thanks

HiyaI have a pipeline set up from a datagen source (business events) - see attached first imageAs you can see the event has fields, now I want to remove fields - source and sourcetype - no matter what I try in the "fields to remove" nothing gets removed (see output) belowI am trying to get the UI to show in red - the fields that are to be dropped here is something even weirder - when I do "!(name.startsWith('source'))" for filter by expression - it shows me the new JSON payload but the UI still has source and sourcetype in it.

Good morning Cribl folks! Does Cribl Stream handle native delivery to Azure Data Explorer (ADX / Kusto)?

I'm using a Rest API to grab logs from a cloud provider. I can see the logs are pulled from the API. I can see that the data is formatted correctly. Within my Data Source. Result Routing → Sent to Routes: NO Pipeline: passthru Destination: SIEMPreview [Before Destination]: Shows my data formatted correctly. Discover: Sends a few lines to my SIEMFull Run: Nothing happens. Any ideas on what to look at to figure this out or how I can troubleshoot this would be greatly appreciated.Thanks!

We have configured a Cribl syslog source to listen on TCP and UDP port 514 however when we check in status of source we see the state as red and a netstat -rn in the OS does not show the port as listening.

I haven't found any documentation for this - please point me at it if it exists - but I wonder what the shutdown procedure of a worker is?I assume it stops all active listeners, then finishes processing any in-flight events before shutting each thread down?Does it disconnect from the leader before processing those events, or otherwise remove itself from the pool of workers available to run collections?Does it attempt to drain it's persistent queues? If so for how long and what happens it if fails?Do destination connections stay up till the very end, or does each get disconnected as soon as there are no more events destined for it?Plus lots of other considerations I'm sure - would be useful have a bullet list or flow chart of the shutdown sequence for reference.

What are the URL's and addresses used for in the Cribl cloud access details pop up:

How can I get my edge nodes to send data to Cribl cloud so it can be seen in my end destination?

Hi, I'm trying to setup a chronicle destination but I'm receiving the following error:Connection error: Client network socket disconnected before secure TLS connection was establishedI have tried curling the endpoint from my worker and I can see a successful connection, I'm not sure what I'm doing incorrectly.

How do we create a Pack for a Security tool that doesn't have pack to convert data into OCSF?

Hi everyone, I can't find a complete list of available variables to use in the REST collector configuration. I only know those that are embedded in the documentation (for example, ${earliest}). Is there a complete reference table which I may have overlooked?

Hi, for most of my SaaS services, I have to use the REST collector to pull events periodically, as they do not support sending their events directly into Cribl. I wonder what the recommended strategy is to ensure that all events are getting collected. What schedule is common to run the REST collector on? every few hours or rather minutes?Most APIs support giving a "from" timestamp parameter - but what variable can I use within Cribl to reference "the last run time of a job" ?In general: Is it better to give the API precise instructions beforehand, so it will not return events already collected, or is it better to just collect duplicate events and then drop them in Cribl (I did it with a Suppression rule, but the thresholds need to be very long)Thanks a lot.

Why do we see this message when using Cribl v4.4.0 with S2S V4 and Splunk forwarder version 9.1.x:{"time": "2023-12-19T15:16:15.549Z","cid": "w0","channel": "input:in_splunk_tcp","level": "error","message": "closed connection","src": "10.10.10.10:62453","error": {"message": "Unsupported op-code 249.","stack": "Error: Unsupported op-code 249.\n at g._processData (/opt/cribl/bin/cribl.js:15:15721335)\n at g._transform (/opt/cribl/bin/cribl.js:15:15717080)\n at Transform._write (node:internal/streams/transform:175:8)\n at writeOrBuffer (node:internal/streams/writable:392:12)\n at _write (node:internal/streams/writable:333:10)\n at Writable.write (node:internal/streams/writable:337:10)\n at TLSSocket.ondata (node:internal/streams/readable:766:22)\n at TLSSocket.emit (node:events:513:28)\n at TLSSocket.emit (node:domain:489:12)\n at TLSSocket.<anonymous> (/opt/cribl/bin/cribl.js:15:12649570)\n at addChunk (node:internal

Posting this to get community feedback and track our progress in case anyone encounters this issue in the future.We are attempting to use the data cloning functionality on our F5 load balancer to duplicate data to our Cribl workers. We want to do this so that we can route, filter, and reduce production data in Cribl without impacting production operations. When the time comes, Cribl will be ready for the cutover without much impact at all, hopefully.Right now, the F5 is sending data to our syslog servers, which then send to Splunk. The end goal is to replace syslog with Cribl, but we want to be able to see all the data in Cribl before then so that we can operate on it. We are successfully cloning data that comes from Splunk UFs and HFs, but the cloned syslog data from the F5 is not being seen by the Cribl worker.The specific p

Hello, has anyone encountered this error? i'm trying to forward my firewall logs to Cribl.I added Syslog Push via QuickConnect. Address: is public IP address of the firewallUDP port: 1514On my firewall Settings:Syslog Server Address: is the Ingress IP of Cribl CloudPort: 1514Are these the correct settings?

channel: func:dns_lookupcid: w11cribl_postproc_pipe_ts: 1702407784.731hits: 1399991keys: 3ksize: 50level: debugmessage: Cache statsmisses: 9time: 2023-12-12T19:03:04.731Zvsize: 240

What is the recommended method of restricting groupings of clients/servers to accessing event collector subscriptions, absent support for computer group control that WEC has?I thought about creating additional listeners and via GPO pointing particular groupings of clients at particular listeners. Is there a better alternative?

Would it be possible to confirm:What does Cribl do with the events when this issue occursWhat is the maximum character limit CRIBL can parse

Why does bootstrap command have HTML character codes?